Part No. ECD11500B

Handmade from lightweight 1.5mm aluminium sheet.

The body has two horizontal swages to add strength and give it the classic look.

The body is approx 4"dia and 5 1/4" high.

It has one 1/2" dia inlet pipe, and one 3/4" dia outlet pipe.

Both the inlet and outlet pipes have swaged ends for added hose security.

This tank has a 3mm thick base mounting plate with 4 1/4" holes in the corners for fixing in the chosen location.

This tank has a capacity of approx 1ltr and is TIG welded throughout.

£60.00 plus £6.00 p&p

Handmade from lightweight 1.5mm aluminium sheet.

The body has two horizontal swages to add strength and give it the classic look.

The body is approx 4"dia and 5 1/4" high.

It has a single 1/2" dia inlet pipe, and one 3/4" dia outlet pipe which can be finished with either a vent pipe or 2" filter (not supplied).

Both the inlet and outlet pipes have swaged ends for added hose security and an M10 drain plug in the base.

The mounting bracket is made of 2mm thick ali with two 1/4" holes that are 4 7/8" apart for fixing in the chosen location.

This tank has a capacity of approx 1ltr and is TIG welded throughout.

£60.00 plus £6.00 p&p

Handmade from lightweight 1.5mm aluminium sheet.

The body has two horizontal swages to add strength and give it the classic look.

The body is approx 4"dia and 5 1/4" high.

There are two 1/2" dia inlet pipes, and one 3/4" dia outlet pipe.

Both the inlet and outlet pipes have swaged ends for added hose security and an M10 drain plug in the base.

The mounting bracket is made of 2mm thick ali with two 1/4" holes that are 4 7/8" apart for fixing in the chosen location.

This tank has a capacity of approx 1ltr and is TIG welded throughout.

£65.00 plus £6.00 p&p

Handmade from lightweight 1.5mm aluminium sheet.

The body has two horizontal swages to add strength and give it the classic look.The body is approx 4"dia and 5 1/4" high.

It has a single 5/8" dia inlet pipe, and one 3/4" dia outlet pipe which can be finished with either a vent pipe or 2" filter (not supplied).

Both the inlet and outlet pipes have swaged ends for added hose security and an M10 drain plug in the base.

The mounting bracket is made of 2mm thick ali with two 1/4" holes that are 4 7/8" apart for fixing in the chosen location.

This tank has a capacity of approx 1ltr and is TIG welded throughout.

£60.00 plus £6.00 p&p