Hand rolled from lightweight 1.5mm aluminium sheet.

The body has two horizontal swages to add strength and give it the classic look.

It has a hand wheeled top and a 2mm thick flat base.

The body is approx 4"dia and 10 1/2"" high.

There are two 1/2" dia inlet pipes, and one 3/4" dia outlet pipe which can be finished with either a vent pipe or a 2" dia filter (not supplied).

Both the inlet and outlet pipes have swaged ends for added hose security and an M10 drain plug in the base.

The mounting bracket is made of 2mm thick ali with four 1/4" holes that are 4 7/8" apart for fixing in the chosen location.

 This tank has a capacity of approx 2ltr and is TIG welded throughout.

£75.00 plus £7.00p&p

Hand rolled from lightweight 1.5mm aluminium sheet.

The body has two horizontal swages to add strength and give it the classic look.

It has a hand wheeled top and a 2mm thick flat base.

The body is approx 4"dia and 10 1/2" high.

There is one 5/8" dia inlet pipe, and one 3/4" dia outlet pipe which can be finished with either a vent pipe or a 2"dia filter (not supplied).

Both the inlet and outlet pipes have swaged ends for added hose security and an M10 drain plug in the base.

The mounting bracket is made of 2mm thick ali with four 1/4" holes that are 4 7/8" apart for fixing in the chosen location.

 This tank has a capacity of approx 2ltr and is TIG welded throughout.

£70.00 plus £7.00 p&p